Key takeaways
- Compare the best dish drying racks from simplehuman, Joseph Joseph, KitchenAid, Surpahs and Simple Houseware by drainage, footprint, capacity and care.
A good dish drying rack does three jobs at once: it holds a full load of plates, bowls and pans off the counter, it moves water into the sink instead of letting it pool on the worktop, and it keeps doing both without rusting or wobbling. The five racks below cover the main designs worth buying, from a full-size steel frame rack with a swivel spout to a roll-up rack that stores in a drawer.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The simplehuman Steel Frame Dish Rack is the best all-around pick for most kitchens, thanks to its swivel spout, wine glass holder and fingerprint-proof frame. Joseph Joseph’s Extend Steel suits variable loads, KitchenAid’s full-size rack handles family-size washing up, Surpahs’ roll-up design saves counter space, and Simple Houseware covers tight budgets.
1. simplehuman Steel Frame Dish Rack
This is the premium end of the category: a solid stainless steel frame paired with a grey plastic drip tray, built around a 360-degree swivel spout that drains into the sink from whichever side faces it. An extendable holder keeps wine glasses and larger stemware off the main rack, silicone-capped plate holders protect edges from chips, and the anti-residue coating on the tray is designed to slow the white mineral build-up that makes cheaper racks look grubby. It is a big footprint, so measure your counter first.
Specs:
- Model: KT1181
- Frame: stainless steel with fingerprint-proof finish
- Footprint: about 22.3 x 20.2 inches, 11.5 inches tall
- Drainage: integrated swivel spout, drains on any side
- Extras: extendable wine glass holder, utensil holder, silicone-capped plate holders
2. Joseph Joseph Extend Steel Expandable Dish Rack
The Extend Steel solves the most common dish rack problem, loads that change size from day to day. Its two-part tray slides open when you wash up after a big meal and closes down for a couple of mugs and plates, so you only give up counter space when you actually need it. The cutlery drainer is removable and includes a dedicated knife slot, and the draining spout swivels to suit different sink positions. The stainless steel finish keeps it looking tidy in open-plan kitchens.
Specs:
- Model: 851692
- Frame: stainless steel
- Design: two-part sliding tray, expands and contracts to fit the load
- Drainage: swivel draining spout
- Extras: removable cutlery holder with knife slot, non-scratch plate dividers
3. KitchenAid Large Capacity Full Size Dish Rack
KitchenAid’s full-size rack is the straightforward family option: a rust-resistant satin-coated wire frame over an angled drain board that sends water straight into the sink, with a removable flatware caddy you can lift out and carry to the drawer. The published weight capacity is 25 pounds, which covers a full load of stoneware plates and a heavy pan or two, and the soft feet keep the frame from sliding or marking the counter. Light grey is the standard finish, and the whole unit weighs about 3 pounds when empty.
Specs:
- Model: KNS896BXGRA
- Frame: rust-resistant satin-coated wire
- Capacity: full size, published weight capacity of 25 pounds
- Drainage: angled self-draining drain board
- Extras: removable flatware caddy, soft non-slip feet
4. Surpahs Roll-Up Dish Drying Rack
If counter space is the problem, the Surpahs takes the counter out of the equation. Silicone-wrapped stainless steel rods span the sink itself, so dishes drip directly into the basin and the rack rolls up into a drawer when you are done. At 20.5 by 13.1 inches it fits across sink openings up to 19.5 inches, and because the surface is heat resistant it doubles as a trivet for hot pans and a cooling surface for baked goods. There is no cutlery caddy, so most people pair it with a small countertop cup for utensils.
Specs:
- Model: MR-1401-GY
- Size: 20.5 x 13.1 inches, fits sink openings up to 19.5 inches
- Material: silicone-wrapped stainless steel rods
- Drainage: over the sink, dishes drip into the basin
- Extras: heat resistant surface doubles as a trivet, rolls up for storage
5. Simple Houseware Stainless Steel Plate Drying Rack
The budget pick is a classic chrome-finished plate rack with a matching drainboard, and it sticks to the basics on purpose. Vertical slots hold plates upright so air can circulate, the board underneath catches drips, and the stainless steel construction wipes clean in seconds. You give up the swivel spouts, glass holders and expandable trays of the pricier models, but for a small household that washes a few plates and glasses at a time, there is very little here to go wrong.
Specs:
- Model: CO-028-2
- Frame: stainless steel, chrome finish
- Design: upright plate slots with matching drainboard
- Drainage: drainboard catches drips under the rack
- Extras: compact footprint for small counters
How to Choose
Start with the footprint. Measure the counter run beside your sink and compare it honestly with the rack dimensions above: full-size frame racks need roughly 22 by 20 inches, while a roll-up rack needs a sink opening narrower than its rod length. If the numbers do not fit, no feature list will save the rack from annoying you daily.
Next, follow the water. Spout designs, like the simplehuman and Joseph Joseph racks here, drain actively into the sink and suit counters that slope the wrong way. Angled boards, like KitchenAid’s, are simpler and have fewer moving parts. Over-sink racks skip drainage hardware entirely because gravity does the work.
Then look at materials. Solid stainless steel frames resist rust best and carry heavy loads without flexing. Coated wire frames are lighter and usually fine, but the coating is the weak point once it chips. Silicone-wrapped rods will not scratch sinks or glassware and shrug off heat, which is why roll-up racks double as trivets.
Capacity is the next check, and it is about slot layout rather than headline size. Count the plate slots, look for a separate row or hooks for mugs and glasses, and check whether bowls and pans have somewhere flat to rest. A rack that technically fits twelve plates but leaves no home for a saucepan will still leave you stacking things on a tea towel.
Finally, match the extras to your actual washing up. Wine glass holders matter if you own stemware, cutlery caddies matter if you wash lots of flatware, and expandable trays matter if your load swings between two plates on weeknights and a full roast dinner on Sundays. Removable parts are worth having whatever you choose, because the caddy and tray are the pieces that need regular washing, and designs that lift apart clean up far faster than one-piece frames.
Who Should Skip a Countertop Dish Rack
Skip this whole category if your dishwasher handles everything and hand washing is a rare event; a small drying mat covers the odd delicate item for less money and no permanent footprint. Also skip fixed full-size racks if your counter is genuinely tiny and your sink is wide, because an over-sink roll-up or an in-sink rack will serve you better. And if you regularly wash oversized stockpots and sheet pans, check the slot spacing and depth before buying, since several stylish racks are designed around standard dinner plates.
Frequently Asked Questions
What size dish rack fits a standard kitchen counter?
Most full-size racks need about 20 to 22 inches of length and 13 to 16 inches of depth once the drainboard is counted. Compact and expandable models can work in roughly half that length. Measure the space beside your sink, including room for the spout to overhang the basin, before choosing.
Do stainless steel dish racks rust?
Quality stainless steel resists rust well, especially the grades used in solid frame racks, but standing water and trapped food residue can still stain any metal over time. Empty the drip tray regularly, rinse the rack weekly, and dry it after heavy use to keep the finish clean.
Can a roll-up dish rack hold heavy pans?
Yes, within reason. Silicone-wrapped steel rod racks are rated by their makers for cookware loads and double as trivets, but the rods span an open sink, so a single very heavy pot is better rested across several rods rather than balanced in the middle. Check the span against your sink opening first.
How do I stop a dish rack from smelling?
Odors come from standing water and residue in the tray, not the dishes. Tip out collected water daily, wash the tray and cutlery caddy in hot soapy water weekly, and let every part air dry fully. Racks with spouts that drain continuously need less of this routine.
Final Verdict
For most kitchens, the simplehuman Steel Frame is the rack to buy: it drains properly, protects glassware, and is built to stay rust-free for years. Choose the Joseph Joseph Extend Steel if your loads change size, the KitchenAid if you want simple full-size capacity, the Surpahs if counter space is your limiting factor, and the Simple Houseware if you just need an honest rack on a budget.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveCollect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registryFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!